Buying a boat during a pandemic, part III

 We discussed, we tracked numbers, we contemplated, but we just can't go to Florida. It's just too scary dangerous out there. We both have some comorbidities so that adds to our worry, plus we are just regular old. And that's enough. Maybe later in the winter when the vaccine is more prevalent. 

Buying a catamaran during a pandemic, part II

 So here we go again!

Last boat I was looking at was a 40' Manta from Endeavor. I actually wanted a 42' Manta, but really can't afford that, so here we are looking at the 40' version.

This one is also 1997 Manta 40. Oddly enough this one dropped in price the day I declined the previous boat and headed back north. Had I looked I could have saved myself another long drive. 

We looked again, had a virtual tour, this one was a great deal more in depth and almost exhaustive in its detailed look at the boat. This dealer really knew their stuff, but more importantly, they knew this boat. I love the Manta line of catamarans. After looking at all the boats, and just hundreds of used boats I started to develop a list of boats in my head to match the "OMG I won the lottery!", "I really would like that expensive shiny over there", and then finally, "I will grudgingly accept this one, because I can afford it." lists. So in Cats the boat at the top of "I would really like that expensive shiny over there" list has been the Manta 42' for a number of years. The accompanying mono hull on that list is the AMEL 52. So when I saw that this particular shiny had dropped even below the price of the previous shiny? OMG!

This boat was further away in Ft. Meyers Beach. A good 14 hour drive, which works out to at least 16 hours on the road, cuz man I gotta stop. I freely admit I am a lousy long distance driver. Anyway got the SO involved in this particular trip. I felt that I was cutting her out of the fun and games of buying a new boat. And frankly It was a serious amount of money to spend with out her approval each step of the way. So pack the truck and off we go. We have a friend that lives an hour or so from the boat yard and she seemed not sick and safe, so we piled into her house for the week. 

OK long story shorter, we loved KokoMo Kat, and we bought her. She is laying in Fort Meyers Beach and it is killing us. COVID winter is here, everything between here and there is now classified as "Uncontrolled Spread" and as much as I want to take delivery of my new adventure, I want to live longer than 2 weeks after I get there. Plus as near as I can tell the hospitals ICU's in that area are at near capacity anyway. And I already see in the news and on social media how seriously the people living down there are taking this. Which is not enough. It's is incredibly insane to politicize a freaking illness, but here we are anyway. 

So now we are just working on a plan to get through to Florida in a hermetically sealed bubble, failing that maybe my truck will suffice. 

Inspecting a sailboat during a pandemic

So I hope I don't die. That's about where I am today. Got back from Florida yesterday. Rented a car and drove to St. Augustine Tuesday. Took about 12 hours. Which is actually just a few hours longer than it would take to fly these days. Particularly with the level of security theater that surrounds aircraft and flying these days. And seemingly just as tiring.

The car was ok, and the trip as uneventful as you would wish. 

Hotels are strange now, but I managed, I think, to stay safe. People on the other hand, well some are obviously stupid. But that is to be expected in our current political environment, I guess. I find the dick nose wears of masks to be the most prevalent of the folks that won't wear a mask properly. Then you have the younger folks that pull it down so they can talk to us old folks. Which is not a great idea, however I'm amazed at how much I read lips versus hearing, or in conjunction with hearing. So I guess after hearing "huh?" a million times, that habit starts. Not a great habit. 

Did see a nice touch of discrimination while driving through South Carolina. White boy allowed in and out of the gas station I was using, unmasked, no issue. POC shows up and walks in to do business and the proprietor behind the counter starts yelling, "Mask, no service no mask!". 

The boat we are looking at had been sitting on the hard for a few years. So was full of raccoon poop and loads of footprints. It was a particularly beautiful Wednesday, not much wind, a nice bright sunny day. I was hoping that was auspicious, but it was not to be. But everyone arrived on time, we got in through the gate, and drove over to the boat. It's always interesting to see how a yard is laid out. This one was nicely regimented rows. Rows and rows of cats sitting on the hard. The one I was interested in unfortunately had a couple jet ski's stored under it, loads of sitting water, with the attendant hordes of mosquitoes. Exterior of the boat looked about what I expected. Worn, showing her years of baking in the sun, but not horrible. The yard had been out the previous day, trying to get a charge in the batteries. Fruitlessly as it turns out, but I skip ahead. The interior smell was certainly not bad. A mix of aged plastics and old diesel fuel. Not a lot of the mustiness you get when stuff sits and molders. The two solar powered fans in the overhead ports were still limping along moving air, so that may have helped. So we spent a couple hours poking around, I took pictures of all the drawers and cabinets to see what was still on board. Really not much. Which is ok, anything fabric will need to be thrown away and replaced. Found they built a tool chest into one of the drawer sets, which is nice. Looks like most of the tools were still there. Top bad the PO (previous owner) evidently never used them. 

I wasn't terribly surprised the batteries were flat. PO had stated that they were fresh, only a few years old, but they didn't leave a trickle charger on them to keep them up, so I guess sitting for two years in a Florida yard is enough to kill them. The start battery seemingly had just enough charge to kick the port engine over and start it. Which was great! Engine wheezed a few times, sputtered then started. White smoke yay! Water discharge, YAY! Things went downhill from there. 

But yeah, unfortunately the previous owner or owners deferred a ton of maintenance. So after a day getting sunburned by the Florida sun I headed back to the hotel then back home.

I eventually declined that particular boat.

Buying a boat during a pandemic...

 So our bid was accepted by the current owner. Which is quite amazing in and of itself. The boat is down in St. Augustine, FL so it is like working with long handled tongs. But just convincing the current owner to sell me his baby is just step one of many steps to getting the boat up here. I'm currently polling my friends to see who is interested in helping drive it up here. It's some 800 miles, or more I haven't laid out the full track yet. 

So boat inspection is the next step. I will be there as a fly on the wall for the inspection. Need to inventory all the various cabinets and see what's on the boat and what will need to be sent down. Bedding, vacuum, pots, pans, coffee maker, charts, and a billion other things I am not thinking about right now.

Had a virtual walk through the other weekend, it looks very nice, doesn't look like it leaks, except for a bucket in the middle of the salon table(??). 

Anyway next is to rent a car and drive down there. I am still hoping to live through this winter so am working to minimize exposure. 

Wow so much empty

 Hello and welcome back!

It's been a few years since I have had much to say here. We have sailed some, but lost the last season to the boatyard. Evidently if you are just asking for a small repair, IE under 5K, you will never ever get your service complete. I needed the starter rebuilt as well as the high pressure fuel pump. The fuel pump was spewing diesel into the bilge, which on a number of levels is just a bad thing. Then the starter would just randomly not work. And frankly I am not going to sail into my slip. So I just needed those things worked on. The boat has been in pieces since February. Granted we are also having a pandemic, but seriously, it's freaking September.

In other news we are looking at buying a catamaran! A sweet Manta 40'. I have been enamored with the Manta line for quite some time. We really like the up galley, the owners stateroom with crawl in vs. crawl over bed. As well as the Camberspar jib. It is quite a bit of boat and will be a nice step up from Amadeus. Really wanted the Manta 42', but can afford the Manta 40', so there we go. Not really sure if I'd miss the "extra" 2'.

Been doing quite a bit of research into the boat and it's parts, especially the sail part. In examining the electronics the autopilot and the sails are all integrated to work together. With the self tacking Camberspar up front to tack under autopilot all you need do is press a button. There is also the option to set a course with way points and have the boat motor to the end, making all needed turns to accommodate the path. Which frankly sounds like huge fun. Get it out of the slip, then engage the auto, motor out to where ever the wind is, and go! We always had a fairly long motor to get out of our slip and out to the bay, so this would make it a bit easier. With the autopilot you can also set the offset to the wind to 0' and it will keep the nose into the wind so as to make raising and lowering sail as simple as possible. Has lazy jacks for both the main and jib. Might also have a permanent spinnaker, but not to sure about that. 

Just found an owners manual as well as an owners club on line.

Anyway we are still in the early stages here. Will try to stay up to date on this process. 

Fair winds!

Edit: So it has been a few weeks since the boatyard returned Amadeus to me. And FFS. They left the boat floating for 9 months with no trickle charger on the batteries, so they are all dead. That is 3 $215 batteries. They put it back in the wrong slip, and used some sort of what looks like twine to moor it. The bill was outrageous and frankly I will never do business with them again.  

Hey sailing!

So we've managed to be out sailing once or twice since the boat went in the water. Managed to hit 7.2 knots the other day in 20 knots indicated true wind. Frankly it was both exhilarating and frightening. We've mainly done lite air sailing, and were out this time in 15 to 20 knot winds, gusting to 25ish. Which really isn't that much of a blow. And we've been out in this kind of wind before, but only on someone else's boat, with that someone in charge. Made a giant change when it was just the two of us out there. Had to roll the genoa in a bit till I depowered the boat enough to be comfortable I wasn't over powering things. But didn't have to reef the main. Which is good as I haven't yet made the required lines to handle that. I think I'll deal with that this weekend.

Managed to get my radar functioning. So everything except the Wifi link is now working. I have the cables for the wifi link at the boat, they just need to be run to the helm. Had an issue getting the boat started last weekend, found a very high impedance connection to the common connector on the battery switch, so swapped that out. Boat started, so I guess I fixed that. Need to check the packing gland on the prop shaft, seems to be a bit more water coming in than I expected while running. And that frankly is going to be a pita to get to, which is why I had the boatyard replace it in the first place.

Not much else is happening sailing wise. Restricting ourselves to early morning sails as of late as it is just so bleeding hot this summer. Looking forward to the fall when things will possibly be a touch cooler.

See you out there!

Yay in the water!

After a long and frankly boring winter Amadeus finally hit the water. We had her hauled last year so we could get the masts down and replace the sheaves in the mastheads, for both the main and the mizzen. So that of course lead to other things:

• New Radar
• New Depth Sounder
• New Wind Instrument
• New Halyards for the mizzen
• New Top light
• New Wind-ex
• New Streaming light
• New Deck Light
• New LED's for all internal lighting.
• Replace Zinks
• Anti Fouling bottom paint
• New Packing for the prop gland

We had already purchased a Zeus multi-display unit and used it last season. I have to say it is superior to the iPad based navigation system we tried to use previously. Mainly this is due to our being able to see it in direct sun. We have no cover over the helm, so direct sun is what we have to deal with while sailing. We hope to deal with this lack of shade in the foreseeable future. 

Issues we have faced so far:

• OMG how do I contort myself into that shape to get to that wire? 
• OMG WTF is THIS? 
• OMG WTH does this do?
• OK really Previous Owner? Did you wire every single thing on the boat directly to the batteries? 
• Hey what is this giant bundle of wires that is cut and bound with old electrical tape?
• This batch of wires is not on the schematic, any clue what it does? 
• Hey this set of wires looks important... Oh wait the other end is just laying in the bilge. Huh?
• OMG this is a set of live wires just laying here, directly connected to the battery. Nice.

Yeah, while I am not the most knowledgeable marine electrician in the world even I know this isn't how stuff is supposed to be. I think we spent at least three days trying to find the routing and purpose of of a number of wires and frankly were only successful maybe 50% of the time.

Anyway while the masts were down we pulled all the old wiring out of the mast, replaced it with new, pulled through the internal conduits as designed. Replaced all the mounting gear for lights and what not and added the new sheaves. 

Working on the getting the navigation network installed. Have to add a NMEA 2000 network to the boat. First challenge was getting the new Depth Sounder/Temperature/Speed sensor installed in the hull. This requires that the old one be removed, a new thru-hull sleeve be glued in, then the sensor slips into that. Yeah had to get the boatyard guys to get the old one out. Then there was some controversy about the sensor I got, ended up they recommended the exact one I had. So I ended up installing the new sensor and thu-hull. And while you'd think that would be fairly straight forward, just put a good amount of 5200 on the flange and up the threads then screw the giant nut on, well no. The original hole was not drilled perpendicular to the hull. The PO had sanded down a piece of plywood, just regular old plywood mind you, into a bit of a wedge shape to accommodate the hole angle. I cut a chunk out of a old plastic cutting board and free-handed a wedge with my trusty Dremel tool. Really the 5200 seals the hole and attaches the thru-hull flange to the hull, the backing nut just keeps it from falling out the bottom till the 5200 sets up. Anyway no leaks, so that is successful so far. 

Once that was done I mounted my new rate compass in the same cabinet, right in line with my keel. Except it has a SimNet connector which is not exactly the same as a standard N2K connector. Cut that off and replaced with a field replaceable N2K connector. Found out I pulled my backbone cable through the boat backwards so my wind instrument wouldn't just connect and terminate the backbone. The backbone requires terminations on both ends. Yanked that out and reversed it, now the wind instrument works as advertised. Added an additional 6' drop cable and three wire to get power to the Display unit. Wanted to come up the steering pedestal and out the front under the compass. Yea, not today. This boat is seriously old and everything is so corroded. Broke the compass mount trying to get the screws off that, so boo. Now I'll have to figure out a replacement for that. So I drilled a hole in the laughably termed hanging locker, in the equally amusingly termed navigators berth and fed the lines through to the cockpit. So now I have wires under the floor slats in the cockpit, not exactly what I wanted, but workable for now. Betty crawled back in there and pinned everything up so we can go back to using it for storage bins. 

On a side note I love how they design and build these sail boats. They have us staffed up to 1800's Royal Navy standards. I have berthing for two in the V-berth, two in the sea berths in the salon, two more in the salon table area, one more across the way from that, one in the navigators berth, and finally two in the aft "Master Cabin". So yeah, berthing for ten. No way I can ever envision ten people trying to survive in this little thing. We'd be sitting in each others laps and murder would break out three days after leaving port.

Got the Radar cable back through the boat and back by the nav station, but another interconnection issue there. Have power, but no connection to the N2K network. The WiFi-1 unit to allow us to monitor stuff on our iPad is yet another SimNet connector, so ordered two SimNet to Micro C cables. Looks like I also have to run a new Ethernet connector to the back of the Main nav display. It'll get done eventually. 

Still need an AIS transponder and attendant wiring, but I'm really in no hurry for that.  

So we wanted to sail to Annapolis for our wedding anniversary but it just took too long to get everything else done. Plus I lost an afternoon to a wonderful migraine. Been having those since my car accident last December, yay. 10 to 20 a month, so very not fun. 

So we drove up instead.

And that's about all for now! Going to get the sails up tomorrow, depending on hangovers from tonight's bacchanal. And then some sailing finally this weekend. 

Getting ever so much closer

Oh my, I think the boat will hit the water later this month. I still have a few bits to source, but nothing that will stop us from going sailing.

As I said earlier I purchased a complete new navigation system over the last year. It's been sitting in my basement and slowly the piece parts have been making their way to the boat. I'm quite excited! Had a bit of concern over the angle the new depth/speed/temp sensor would end up being at once installed in the boat. Spent a considerable amount of time researching this particular sensor that came with my system, a DST-800. Happily found out that it will work at mounting angles from 0 to 22 degrees. Which is great because my hull is about 18 degrees where I plan on mounting it. I will need to be very aware of the offset when I am leaning to starboard, as the sensor will be tilted beyond what it can handle. So I'll be mounting the can it sits in this weekend. Then run the wiring for the network on the boat. I also need to find a place to mount my rate compass. That tells all the things attached to my navigation network which way the boat is oriented. It will probably end up right next to my DST sensor in the forward port settee cabinet.

Have replaced all my sheaves, and received all the new rope for new halyards. Also replaced all the wiring in the mast. New Radar cable, three wire for the steaming/work light, VHF antenna wiring, two wire for the mast head light. All fit in the handy conduits that were in the mast for exactly this reason. Now only my halyards will run free through that space. Hopefully there will be much less banging.

This so far has been a fun project. I'm not as fast as I used to be, but I think that is more of a function of age than my current brain damage. I still need to source a few exit boxes, but if I can't I can send them to Zephyr and get them rebuilt. I love his communications, just the price and his address. Nice.

I'll post pictures once I recover some shots from Betty's phone.

I'm still wondering about a staysail. Doing some further research in the "owner's manual" I found one of the exit boxes was on the front of the mizzen was for flying a staysail. I wonder if the extra wire I found was to fly an extra jib, or was it for a main mast rigged staysail? Anyway I bought enough rope to make a halyard for that. I have a line run up the mizzen to draw that line in, so I wonder if I should just not mount it, I don't think I even own a staysail at this point. I'll have to look into getting one before we go far foreign. But I also need to know how to rig and fly my spinnaker as well. Oh well off to school I guess. Loads of youtube in my future as I struggle to figure this out. Oh I also need to get a jib pole as well.

Well that's it today from this Oldy Boat.

Back again...

Well after a long hiatus I'm back again. mainly because I've been watching SV Delos Youtube videos.

We spent last season sailing Amadeus as much as we could. Which wasn't as much as we should have, I unfortunately have developed a touch of anxiety about taking her off of the moorings. Severe enough that we can't cast off sometimes. Yeah, fearless captain isn't me. But we did get out most weekends at least once. We sailed a lot in the light winds that we find most weekends in the area, and managed to go out and come back without ever bumping into anything, breaking anything on the boat or running aground. And we managed this with very little in the way of navigation equipment. We have a GPS enabled chart plotter, which is a freaking godsend. But that really is all we have. Well that and really well marked cruising grounds.

I have since purchased a complete navigation system, depth/speed/temp sensor, wind speed and direction sensor for the masthead as well as a radar unit that overlays the radar on the chart plotter. The new radar unit uses non ionizing radiation so it is much safer to use than the old style I used to work on, so it is more energy efficient, and won't cook your body parts if you get in front of it somehow.  Of course that also means that I can't hoist my Christmas turkey up in front of it and cook the thing in a speedy fashion either, but I felt that was a fair trade off. The E2-C Radar system I used to work on had the reputation of causing sea gulls to explode if they flew through the cone of radiation, but sea tales are all about the story, with the same touching concern with facts as our current political leadership.

We had Amadeus hauled early in November and pulled the masts as well. They really needed some work done. I was missing a halyard on the mizzen so I could not rig the mizzen sail. The mainsail had gone from difficult to OMG is this even going up? And every time we had to raise the genoa it was a battle as it kept jamming and getting twisted. We were completely unable to raise the working Jib at all as it jammed and twisted almost immediately. I wanted to examine the condition of the sheaves that live at the top of the mastheads. And really there are three ways to accomplish this.

1. I could put on the bosun's chair and have Betty winch me to the top of the mast and look at them.
1. One issue with this is that I have to use one of the sheaves (what the pulleys the halyards run through up there) to accomplish that.
2. Second issue is I am a complete baby when it comes to heights. Scares me spitless.
2. I could winch Betty to the top of the mast and have her look.
1. She has no idea what she is looking at.
2. Still have to use one of those sheaves.
3. Pull the masts off the boat and lay them flat for work and inspection.

So we took the masts down. I needed to replace the internal wiring anyway because it has been banging around inside the mast for maybe thirty years and for some reason, probably because it is a PITA, the wiring has not been run through the conduits that are on the inside the mast for exactly that purpose. Makes for a really noisy mast system while in a rolly situation. Also lets me inspect the fittings and connections of the standing rigging. Which frankly look fine. So now I have the ugliest slowest speed boat ever seen.

I started this repair/down season feeling optimistic that I could do a couple searches for pieces and parts, bits and bobs and voila I'd be able to source said parts for this beastie and in no time at all we'd be all ready to go back in the water by April no sweat. Yeah I'm an idiot. First and foremost I called Jeanneau, they made the boat after all, who never bothered to return my calls, go figure. I asked for help on the Jeanneau Pro Boards, which garnered zero responses to my requests for assistance. So I struck out on my own, which garnered even fewer useful results. So I did what I should have done in the first place, I asked the guys at the boatyard for assistance. Much better. In one 15 minute phone call I received three solid leads and they even sent my poor old busted stuff off with a sales guy for a quote. The quote that came back was frightening, but that wasn't the boatyards fault. I think I have mentioned them before, but the fine folks at Washburn's Boatyard are both kind and helpful. The ladies in the front office are helpful, the guys in the parts department are always willing to answer my newbie questions and help as much as possible. And did in fact help considerably. I was able to order custom built sheaves to replace the originals and those cost less than $400.00. Shout out to Ed at Zephyr Sheaves who handled building those for me. The old ones were super worn out, had some nylon type insert as the bearing surface. That had gone super hard and brittle over the 30 years they had been up there exposed to weather and were quite obviously past their useful service life.

I'm still looking for a series of things called exit boxes and they come in a variety of shapes and sizes. Of the ones I have located so far none match. Mine are frozen solid due to corrosion. I took a set of them off the mast and put them in a jar with penetrating oil for three months, ah sucks to be me, not one of them can be moved.

I had also changed halyards last year, and while I thought I was using the correct sizes, I'm once again proved wrong. While I used the same size as the PO, HE was the idiot this time. As he is dead and can no longer defend himself I'm totally going to lay the blame on him. PO is the idiot this time! HE chose the wrong size rope leading me to choose the incorrect size of rope to fashion into my  halyards. So annoying. So I have to purchase new halyards this year, AGAIN (Huff, Puff, HUFF) Anyway that is another couple hundred bucks.

I ordered a bunch of stuff, a mount for my radar transceiver unit to attach to the mast, a LED masthead light, a new LED work light with separate LED steaming light that is still attached to the work light, uses some of the same wiring, a new VHF whip antenna. Feeling inadequate for some reason I got the 3' whip vice the 1 1/2' version. Will still work with the VHF so anyway there's that. The size difference isn't going to make it work better, it's at the top of a 52' mast after all, but I wanted a 3' whip. So I got a 3' whip. I'm going to be so pissed if it doesn't work for some reason. To round out my order I got some wire to connect my lights with, a bunch of shroud covers and new tip covers for my spreaders. I would be so pissed if I tore my 150% Genoa. I was flat amazed they wanted to charge close to $80 USD for leather tip covers, a piece, to sew over my spreader tips. So I got plastic. I also ordered 6 1' sections of bird spiking strips. Maybe I can dissuade the local ospreys from using my mastheads as combination butcher blocks and dining room tables. This may keep the carnage from accumulating in the cockpit, with commensurate stench. Few things smell quite as nice as week old crab guts left laying in the sun for a week.

I was going to modify a plastic cutting board to make an adapter so I could reuse the old mount I had for the radome from my old burned out radar unit. Like I mentioned earlier I got a new radar system, and who would ever include a mast mount with a new radome? It's completely unheard of for a radome to be to be mounted on a mast, you know like about 3/4 of the way up say a main mast? That's a deeply sarcastic statement if you couldn't tell. But then I got to thinking about this a bit further. I spent a pretty good penny for my new radome and if my plastic fantastic adapter failed at some point my pricy radome would fall off the mast and dangle from its wires while repeatedly flinging itself suicidally at the mast till it was returned to kit form. I doubt that B&G's warranty would cover that sort of damage. So I ponied up the cash and bought the official mount. So now I feel virtuous but a little poorer.

Now for the other fun I encountered on my off season, at the beginning of December I was involved in an auto accident. Some guy in a hurry to get gas or sometime stated he didn't see our Nissan Murano barreling up the road and darted in front of me which ended up totaling our new Murano. He got the ticket. I got the concussion. Now I am battling post concussion syndrome and am not enjoying my new status at all. :(  So as this is a sailing blog I will not really be touching on that after this, because really who wants to read about another late middle aged guys medical issues? I have had a freaking headache for close on to three months now, my anxiety is through the roof, I can't seem to hit the programming zone anymore, my memory is even worse than it has ever ever been, and I would give my eyeteeth for a solid night of sleep. Yeah ok, enough medical whining.

Running up to the boat this weekend to affix my new depth, speed sensor to the wire of my old depth sensor so the boatyard guys can swap them out for me. I am just not up to doing the work at this point, I'd love to, but spending that amount of time bent over with my already pounding head just sounds like a recipe for a gigantic screw up.

I'm about to post this, so for the 11 guys in Korea that are going to instantly pounce on it 안녕하세요

We are in the water!

Yeah us!

Ok thought we were going in the water sometime ago, just needed a touch of bottom paint. Wrong. Had to get the old paint soda blasted off as the PO never really did any of that sort of stuff, so a decade or so of old nasty bottom paint on the boat. Had the boatyard get a guy in to soda blast the bottom. Peachy! Nope, not quite so fast there new boat owner.

This is close up of what was left after the soda blast was finished.  Many hours of rust removal from the keel, many hours of sanding, four coats of barrier coat, THEN a coat of ablative anti-foul.  Now can we go in the water PLEASE?

Crane trip into the well. So yes we made it into the water. And didn't need to be pulled immediately out of the water either. Motor started immediately and off we went. Had a friend I met at sailing classes, actually one of the instructors, help me drive it out to the slip.  

Had no idea that mooring was so stressful. First off going in reverse to back down is a no go.  Stopping, yes, going anywhere but in a circle? Not happening yet. Tomorrow is hanging the sails day. Then maybe we can get some sailing pictures up.

Later all!